top of page

EDGE PROCESSING
BEVELLING
It is the grinding process of glass in 90° angle on glass edge and desirable angle on front of the glass. Width of bevelled is changed as to the angle. During the bevelling process edges of the glass becames matt.
FEASIBILITY
Max: 2000 * 2500 mm, Min: 150 * 150 mm
GROOVING
It is the process of shaping the glass surface by carving it in 2 mm on glass surface.
GRINDING
It is the process of shaping the glass edges. The grinding types;taking the sharpness of the edges is arrised edge, grinding the edges with 90° and 45° slope is flat grinding, grinding the edges like pen-point is C grinding.
During the grinding process edges of the glass becames matt. Polishing can be done as an secondary process.
FEASIBILTY
Max: 2600 * 4000 mm, Min: 300 * 300 mm

SURFACE PROCESSING
FULL SURFACE PRINT
It is the process of painting the glass surface with RAL colors by silkscreen and roller coater.
SILK SCREEN PRINT
It is the process of painting the glass surface by silkscreen pattern. After printing process, the painted glass has to be tempered.
FEASIBILITY
Screenprinting
Max: 2400 * 5000 mm, Min: 300 * 300 mm
Roller Printing
Max: 2200 * 4000 mm, Min: 300 * 300 mm
HOLE
It is the process of drilling the glass with or without countersink in various diameters.Diameters of holes generally should not be less than the thickness of the glass.
FEASIBILITY
Max: 2300 * 4500 mm
SANDBLASTING
The sandblasting process is the removal of silisyum particles from the surface of glass using silica sand. In this way microscopic cavities occur on the glass surface and due to the refraction occurring in different directions our eyes perceive the glass to be white.
FEASIBILITY
Max: 2600 * 5000 mm
bottom of page