It is the grinding process of glass in 90° angle on glass edge and desirable angle on front of the glass. Width of bevelled is changed as to the angle. During the bevelling process edges of the glass becames matt.
FEASIBILITY
Max: 2000 * 2500 mm, Min: 150 * 150 mm
It is the process of shaping the glass surface by carving it in 2 mm on glass surface.
It is the process of shaping the glass edges. The grinding types;taking the sharpness of the edges is arrised edge, grinding the edges with 90° and 45° slope is flat grinding, grinding the edges like pen-point is C grinding.
During the grinding process edges of the glass becames matt. Polishing can be done as an secondary process.
FEASIBILTY
Max: 2600 * 4000 mm, Min: 300 * 300 mm
